Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #1: Tue Nov  4 13:22:49 CET 2003
    root@pc-o.nm.ruhr-uni-bochum.de:/usr/obj/usr/src/sys/FEAP
Calibrating clock(s) ... TSC clock: 1694421650 Hz, i8254 clock: 1193125 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Pentium(R) M processor 1700MHz (1694.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 536535040 (523960K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x0003bd000 - 0x01ffa5fff, 532582400 bytes (130025 pages)
avail memory = 518397952 (506248K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xc97e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ACPI: 000fdf00
Preloaded elf kernel "kernel.noacpi" at 0xc0396000.
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=33408086)
Using $PIR table, 9 entries at 0xc00fc590
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x3340, revid=0x03
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base f0000000, size 26
found->	vendor=0x8086, dev=0x3341, revid=0x03
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 0000bf80, size  5
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[20]: type 1, range 32, base 0000bf40, size  5
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=11
	map[20]: type 1, range 32, base 0000bf20, size  5
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	class=0c-03-20, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=11
	map[10]: type 1, range 32, base f4fffc00, size 10
found->	vendor=0x8086, dev=0x2448, revid=0x81
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=2 	secondarybus=2
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	class=01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=0
	map[10]: type 1, range 32, base 000001f0, size  3
	map[14]: type 1, range 32, base 000003f4, size  2
	map[18]: type 1, range 32, base 00000170, size  3
	map[1c]: type 1, range 32, base 00000374, size  2
	map[20]: type 1, range 32, base 0000bfa0, size  4
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 0000b800, size  8
	map[14]: type 1, range 32, base 0000bc40, size  6
	map[18]: type 1, range 32, base f4fff800, size  9
	map[1c]: type 1, range 32, base f4fff400, size  8
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	class=07-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 0000b400, size  8
	map[14]: type 1, range 32, base 0000b080, size  7
pci0: <PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI to PCI bridge (vendor=8086 device=3341)> at device 1.0 on pci0
found->	vendor=0x1002, dev=0x4c66, revid=0x01
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base e8000000, size 27
	map[14]: type 1, range 32, base 0000c000, size  8
	map[18]: type 1, range 32, base fcff0000, size 16
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c66 graphics accelerator> (vendor=0x1002, dev=0x4c66) at 0.0 irq 11
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
	using shared irq11.
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> (vendor=0x8086, dev=0x24cd) at 29.7 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found->	vendor=0x14e4, dev=0x16a6, revid=0x02
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 64, base faff0000, size 16
found->	vendor=0x1217, dev=0x7113, revid=0x20
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
found->	vendor=0x1217, dev=0x7113, revid=0x20
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
found->	vendor=0x8086, dev=0x1043, revid=0x04
	class=02-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base fafef000, size 12
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2
bge0: Ethernet address: 00:0d:56:72:39:eb
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bpf: bge0 attached
Found unknown YENTA PCI-CardBus Bridge devid 0x71131217
pcic0: <YENTA PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pcic0: PCI Configuration space:
  0x00: 0x71131217 0x04100107 0x06070020 0x00822000 
  0x10: 0x88000000 0x020000a0 0x20000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000001 
  0x30: 0x00000001 0x00000001 0x00000001 0x0460010b 
  0x40: 0x011d1028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x018c1882 
  0x90: 0x00350003 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x0000000d 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x08004000 0x80820bea 0x00000000 0x00400000 
  0xe0: 0x00828000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card 16-bit bus (classic)> on pcic0
Found unknown YENTA PCI-CardBus Bridge devid 0x71131217
pcic1: <YENTA PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
pcic1: PCI Memory allocated: 0x88001000
pcic1: PCI Configuration space:
  0x00: 0x71131217 0x04100107 0x06070020 0x00822000 
  0x10: 0x88001000 0x020000a0 0x20000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000001 
  0x30: 0x00000001 0x00000001 0x00000001 0x0420010b 
  0x40: 0x011d1028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00000000 0x00000000 0x00000000 0x018c1882 
  0x90: 0x00350003 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe020001 0x00c04000 0x00000000 0x0000000d 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x08004000 0x80800bea 0x00000000 0x04400000 
  0xe0: 0x00828000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci2: <unknown card> (vendor=0x8086, dev=0x1043) at 3.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xbfa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xbfa8
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 11
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 56 84 
9e 1f 00 4f 0d 0e 00 00 07 80 90 84 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 56 84 
9e 1f 00 4f 0d 0e 00 00 07 80 90 84 8f 28 1f 8f 
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3: not probed (disabled)
sio0: irq maps: 0xa01 0xa11 0xa01 0xa01
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0xa01 0xa09 0xa01 0xa01
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
pcic1: Event mask 0x6
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 68c800, tty 63189a, net 67189a
bpf: sl0 attached
bpf: faith0 attached
bpf: lo0 attached
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <HITACHI_DK23FB-60/00M0A0C1> ATA-5 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, BIOSDMA
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
Mounting root from ufs:/dev/ad0s4a
ad0s1: type 0xde, start 63, end = 96389, size 96327 : OK
ad0s2: type 0x7, start 96390, end = 8482319, size 8385930 : OK
ad0s3: type 0xf, start 8482320, end = 28965194, size 20482875 : OK
ad0s4: type 0xa5, start 28965195, end = 117210239, size 88245045 : OK
ad0s5: type 0xb, start 8482383, end = 28965194, size 20482812 : OK
start_init: trying /sbin/init
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 6f
pccard: card removed, slot 1
pcic1: reset 1 int is 10 stat is 6f
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 2 int is 70 stat is 6f
pcic1: reset 3 int is 70 stat is 6f
pcic1: reset 0 
pcic1: Event mask 0x8
splash: image decoder found: green_saver
Linux ELF exec handler installed